Stephenson Melt And Pour Soap Base Clear SLS FREE - 1Kg

Product Information

There are soft forms of Melt & Pour soap bases available (often known as bath butter or 'ice cream' soap), which can be piped like a cream icing when warm, which can be used to great effect when 'decorating' soap 'cakes'. Some recipes use oils as addictives (superfat). With this, I did have bad experiences, with the oils separating from the soap base, therefore, I don’t advise it. If you make the soap base at home, add your superfat when making the soap. Use Mendrulandia soap calculator to adjust oils and lye water quantities. However, my soap base recipes already have a superfat of 5%, so you don’t really need to worry about it. If you are purchasing your soap base, follow the manufacturer’s instructions about addictives, and see if you can add an oil or butter. Step 2: Measure all base oils (including stearic acid) into a container and melt. I figured heat would help things along so I heated to around 180-200 degrees Fahrenheit.

There are my results and recipes that I’ve tried so far. As the soap cures a bit, the lather and clarity can improve. So, test your soap right after you make it and test it again in a few weeks.You can add also exfoliating ingredients, like poppy seeds, or ground coffee, but I really want to keep this soap simple, and show you how good a soap can look without overdoing with addictives or techniques. Find Where To Buy Handmade Clear Soap

White sugar produces the best results. You can use raw sugar but your soap will have more amber color. For more vibrant, stable colors, go for mineral colorants: ultramarines, iron or chromium oxides. These mineral colorants for soap making are still considered natural ingredients, even though they are manufactured to make the minerals safe (by removing harmful heavy metals).

Removing Soaps From The Mould

Let’s take a look at how to make glycerin and then explore my favorite, recipe for how to make a glycerin soap base. How Glycerin is Made When creating a transparent soap recipe, choose at least 75% hard oils (coconut oil, palm oil, tallow, lard, stearic acid). All of the solvents added can soften a recipe that contains lots of soft oils. Include castor oil in your recipe. Castor oil is a bit of solvent so works well in transparent soap. The simplest technique is to colour a small amount of opaque soap base and pour it into a shallow mould. Once set, cut into small chunks or flakes. Make up a complimentary coloured batch of clear soap base. Place the chunks in the mould for the final soap and pour the second, clear soap into the mould over the opaque chunks. This gives a simple and effective appearance to an otherwise plain bar.

Whatever you are doing, the most important thing to remember is not to overheat your soap base. You need only heat it until it melts and no further (exceptions to this rule are the Natural or Organic bases which should be heated to 75degC to avoid 'blooming' in the finished soaps). Cutting the soap base into small chunks will help this, especially if using a microwave, although small chunks will melt far easier with any method used, so it's worth the time in doing this. Melt-n-pour is so simple it lends itself to experimentation. My first simple experimental soap was a 'Jam Tart' soap, which was well received by small children and a great way of adding a little fun to a childs bathtime. The simple techniques of combining sheets of soap which can be separately coloured and/or fragranced and easily rolled or shaped whilst still slightly soft, with a separately coloured/fragranced soap poured into or around the shape can result in a huge variety of colours and appearances. Use opaque soap within a clear soap to show off the colours and shapes within to their best. There is no such thing as a one-size-fits-all body soap, as the best soap brand for you depends on your specific skin concerns. However! You should keep a few things in mind when trying to decide what kind of soap to get for your shower: Skip the sulfates Warning! You do use alcohol in this process so be aware of open flames or anything that might ignite the fumes. I went so far as to blow out the gas starters on my stove since I was making this in my kitchen. I opened the patio door so that I had fresh air at all times. Make sure you have a fire extinguisher on hand (a bit dramatic, but you should have one in your kitchen anyways). The addition of extra ingredients is more leisurely using this method, as continuous low heat is available to keep the mixture from forming a skin. Again, be careful not to introduce bubbles if at all possible. Fragrance should be the last addition, as heat will cause some evaporation. Again, work on around 20ml of fragrance or essential oil per Kilo for a meaningful fragrance.Removing individual soaps from moulds is perfectly simple. Be sure to leave the soap to cool completely. If using a suitable mass-produced mould, which will have a shiny surface, the soap will release with slight pressure. More complex or larger moulds can require some force. To help remove a soap from a large or complicated mould, ensure it has fully set and put it in the freezer until quite cold throughout (don't actually freeze it), When you remove it from the freezer the change in temperature on the surface of the soap will help it release from the mould. This method can be especially useful when making large loafs or slabs, which are to be cut by weight or into bar sizes later. To take best advantage of your handmade soap (made by yourself or store-bougth), read How Do You Use Handmade Soap? Related Posts Ingredients and Recipes The secret for making glycerin soap is the addition of solvents to the oils-lye water mixture. And the secret to make a crystal-clear soap base at home is to use stearic acid with the oils and the right temperatures. It’s very easy to turn your soap base yellowish (the sugar syrup will go brown easily with high temperature), so make sure you don’t overheat the soap batter. Be sure to wrap your soap up or it will sweat…especially batches 5 and 6, that use a higher amount of solvents. Solvents are what make the magic happen. They dissolve the soap crystals that normally form when combining sodium hydroxide with fatty acids (base oils). Solvents include alcohol, liquid glycerin and sugar. You can use one, or for best results, try a combination.